Anyone who ever performs profiling of a Zend Framework application will
immediately recognize that class loading is relatively expensive in Zend
Framework. Between the sheer number of class files that need to be
loaded for many components, to the use of plugins that do not have a 1:1
relationship between their class name and the file system, the various
require_once() can be problematic. This chapter intends to provide
some concrete solutions to these issues.
One trivial optimization you can do to increase the speed of class loading is to pay careful attention to your include_path. In particular, you should do four things: use absolute paths (or paths relative to absolute paths), reduce the number of include paths you define, have your Zend Framework include_path as early as possible, and only include the current directory path at the end of your include_path.
While this may seem a micro-optimization, the fact is that if you don't, you'll get very little benefit from PHP's realpath cache, and as a result, opcode caching will not perform nearly as you may expect.
There are two easy ways to ensure this. First, you can hardcode
the paths in your
.htaccess. Second, you
can use PHP's
realpath() function when
setting your include_path:
$paths = array(
realpath(dirname(__FILE__) . '/../library'),
You can use relative paths -- so long as they are relative to an absolute path:
$paths = array(
APPLICATION_PATH . '/../library'),
However, even so, it's typically a trivial task to simply pass
the path to
Include paths are scanned in the order in which they appear in the include_path. Obviously, this means that you'll get a result faster if the file is found on the first scan rather than the last. Thus, a rather obvious enhancement is to simply reduce the number of paths in your include_path to only what you need. Look through each include_path you've defined, and determine if you actually have any functionality in that path that is used in your application; if not, remove it.
Another optimization is to combine paths. For instance, Zend Framework follows PEAR naming conventions; thus, if you are using PEAR libraries (or libraries from another framework or component library that follows PEAR CS), try to put all of these libraries on the same include_path. This can often be achieved by something as simple as symlinking one or more libraries into a common directory.
Continuing from the previous suggestion, another obvious optimization is to define your Zend Framework include_path as early as possible in your include_path. In most cases, it should be the first path in the list. This ensures that files included from Zend Framework are found on the first scan.
Most include_path examples show using the current directory, or '.'. This is convenient for ensuring that scripts in the same directory as the file requiring them can be loaded. However, these same examples typically show this path item as the first item in the include_path -- which means that the current directory tree is always scanned first. In most cases, with Zend Framework applications, this is not desired, and the path may be safely pushed to the last item in the list.
Przykład F.1. Example: Optimized include_path
Let's put all of these suggestions together. Our assumption will be that you
are using one or more PEAR libraries in conjunction with
Zend Framework -- perhaps the PHPUnit and
libraries -- and that you occasionally need to include
files relative to the current file.
First, we'll create a library directory in our project. Inside that
directory, we'll symlink our Zend Framework's
directory, as well as the necessary directories from our PEAR
This allows us to add our own library code if necessary, while keeping shared libraries intact.
Next, we'll opt to create our include_path programmatically
public/index.php file. This allows us to move
our code around on the file system, without needing to edit the
include_path every time.
We'll borrow ideas from each of the suggestions above: we'll use
absolute paths, as determined using
we'll include Zend Framework's include path early; we've
already consolidated include_paths; and we'll put the current
directory as the last path. In fact, we're doing really well
here -- we're going to end up with only two paths.
$paths = array(
realpath(dirname(__FILE__) . '/../library'),
Lazy loading is an optimization technique designed to push the expensive operation of loading a class file until the last possible moment -- i.e., when instantiating an object of that class, calling a static class method, or referencing a class constant or static property. PHP supports this via autoloading, which allows you to define one or more callbacks to execute in order to map a class name to a file.
However, most benefits you may reap from autoloading are negated if
your library code is still performing
require_once() calls --
which is precisely the case with Zend Framework. So, the question is: how can
you eliminate those
require_once() calls in order to maximize
An easy way to strip
require_once() calls is to use the
UNIX utilities 'find' and 'sed' in conjunction to comment out
each call. Try executing the following statements (where '%'
indicates the shell prompt):
% cd path/to/ZendFramework/library
% find . -name '*.php' -not -wholename '*/Loader/Autoloader.php' \
-not -wholename '*/Application.php' -print0 | \
xargs -0 sed --regexp-extended --in-place 's/(require_once)/\/\/ \1/g'
This one-liner (broken into two lines for readability) iterates
through each PHP file and tells it to replace each instance of
'require_once' with '// require_once', effectively commenting
out each such statement. (It selectively keeps
require_once() calls within
Zend_Loader_Autoloader, as these classes will fail without
This command could be added to an automated build or release
process trivially, helping boost performance in your production
application. It should be noted, however, that if you use this
technique, you must utilize autoloading;
you can do that from your "
public/index.php" file with the
Many components have plugins, which allow you to create your own classes to utilize with the component, as well as to override existing, standard plugins shipped with Zend Framework. This provides important flexibility to the framework, but at a price: plugin loading is a fairly expensive task.
The plugin loader allows you to register class prefix / path pairs, allowing you to specify class files in non-standard paths. Each prefix can have multiple paths associated with it. Internally, the plugin loader loops through each prefix, and then through each path attached to it, testing to see if the file exists and is readable on that path. It then loads it, and tests to see that the class it is looking for is available. As you might imagine, this can lead to many stat calls on the file system.
Multiply this by the number of components that use the PluginLoader, and you get an idea of the scope of this issue. At the time of this writing, the following components made use of the PluginLoader:
Zend_Dojo: view helpers, form elements and decorators
Zend_Filter_Inflector: filters (used by the
ViewRenderer action helper and
Zend_Filter_Input: filters and validators
Zend_Form: elements, validators, filters,
decorators, captcha and file transfer adapters
Zend_View: helpers, filters
How can you reduce the number of such calls made?
Zend Framework 1.7.0 adds an include file cache to the
PluginLoader. This functionality writes "
calls to a file, which you can then include in your bootstrap. While this
include_once() calls to your code, it
also ensures that the PluginLoader returns as early as possible.
The PluginLoader documentation includes a complete example of its use.